One terminal of the body precision ring is coated green mark. Fusu Characteristics Rated Power P+70°C(W)Dmax Lmaxd I Multiple of Rated Power Resistance range (Φ) (Φ) <2Ω2Ω-10Ω>10Ωmmmmmmmm0.252.57.00.6±0.0528±2Time to Fusu S0.53.910.512—<60<3015.514.00.8±0.0516<60<30<1526.517.025<30<15<7.5· Recommended Electrical Parameters:Rated Power P+70°C(W) T.C.R (10-6/°C)Resistance range (Ω) Tolerance max.vol.at break off (V)Limiting Insulation Voltage(d.c.or.a.c.peak) (V) 0.25±3500.47Ω-1KΩ±5% ±10%200250 0.5250 1350350 2 High-standard fusible resistors can be provided by agreement. Resistance and tolerance are marker by color ring in body of products. ·Performance Specification: CharacteristicsPerformance RequirementTemperature coefficient±350PPM/°C Max.Short time overload Resistance change rate is ± (1.0%+0.05Ω).With no evidence of mechanical damageDielectric withstandingVoltageNo evidence of flashover mechanical damage, arcing or insulation break down.Temperature cyclingResistance change rate is ± (1.0%+0.05Ω).With no evidence of mechanical damage.Damp Heat,Steady StateResistance change rate is ± (5.0%+0.1Ω).With no evidence of mechanical damage.Load life Resistance change rate is ± (5.0%+0.1Ω).With no evidence of mechanical damage.Terminal strength No evidence of mechanical damageResistance to soldering heat Resistance change rate is ± (1.0%+0.05Ω).With no evidence of mechanical damage.Solder ability 95% coverage Min.