Plastic Rods

Nylon RodPerformance Characteristics:Excellent bearing and wear propertiesStrong and stiffGood chemical resistanceEasy to machineReduced noise, weight, and wear of mating parts compared with many traditional metal bearing materialsInternally lubricated grades often eliminate the need for external...

MATERIAL: PMMA ACRYLIC...

(a) Sizes Availabe,-Extruded Rod Min. Diameter= 5mm, Max. Diameter= 150mm, Length= normal 1 m, or according to customer's request-Moulded Rod Min. Diameter= 5mm, Max. Diameter=300mm, Length: Max. 300mm(b) Extruded Rod Diameter 4~9mm made from dispersion PTFE resin; Diameter 10~50mm made from...

Material:transparent psLength:112mmPlane diameter:15mmPrint:as per your request printing LOGOPacked:1pc/opp bag 5000pcs/CTN

PERFORMANCE:teflon Rods have wide service temperature range(180 +260 ), high chemical resistance, high insulation, non-stick, low friction and long lifeAPPLICATRON:teflon Rods is used for machine parts such as, connectors, terminals and other electrical parts.SPECIFICATION:length: 300mm; 1000mm;...

Recycled PTFE rod1.Trustworthy quality2.Low minimum order quantity with competitive prices.3.Good after sale services.4.100% virgin PTFE resin and recycled materials available5.OurPTFE rodcomes withflat and tidy surface without defects or crevices.6.We can also produce according to drawings...

MTPU raw materials and TOO casting machine for production are imported separately from Japanese Mitsui and Germany. The unique liquidoid formulation technique of MTPU is a kind of raw material with high intensity and high resistance to wearing, and a high molecular polymer falling in between...

teflon rod:could be aviable Nylon rod, Nylon sheet, Teflon sheet etc.customer's request when order

Plastic Rod:Peek rod: 1.High temperature resistance.2.The continuous use temperature of 260C .3.its 30% GF or CF enhance brand variant of the hot load temperature up to 316C. 4.Good toughness and rigidity. 5.Good radiation resistance and resistance to peeling. 6.Godd wear resistance equivaient to...

Features:1) Material: Plastic, acrylic.PMMA.square acrylic rod2) Acryl are suitable material for such things as furnitures,hardware parts, electronic parts, craft, lighting, Plastic products,toys,cosmetics,industrial headwear and lanterns,giftware,mechanical apparatus etc3) Size: 2*2mm, 3*3mm,...

POM RodsResistant to organic solvents, insoluble at room temperature. Good low-temperature, heat distortion temperature, and PC / PTFE and nylon are similar, than PVC PS / PE high. Compressive strength of high, second only to the glass fiber, excellent wear and anti-submarine degeneration, high -...

100% virgin teflon rod(ptfe pp pe nylon pa6 and so on)Application: It is used to make bearing strip, sealing, lubricant, non-stick parts and electric insulation parts of all sorts of frequency.Main Technical dataItemDensityTensile strengthTear elongationUnitg/cm3Mpa%Target2.10-2.30≥14.0≥140

PE RodHDPE RodName: HDPE(highdensity polyethylene)Color: natural, black, other color can be customizedDiameter:1mm--200mmAny length any colorI. HDPERod DescriptionHDPE is used in a variety of applications and industries where excellent impact resistance, high tensile strength, low moisture...

...

FeaturesThere are three kinds of PTFE Rods to offer.One is manufactured ty paste extruding method in the diameter from 4 to 9mm and the other is made by ram ertruding method in the diameter from 10 to 50mm; Rods over the diameter from 55 to 300mm are manufactured by moulding..Main technical...

PTFEextruded Baris made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing Plastics,teflon rodhas the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant pipe, and corrosion-resistant insulating pipe for different corrosive...

PTFE rod:Features:There are two kinds of PTFE Rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; Rods Over the diameter 50mm are manufactured by moulding. PTFE is the most...

Extruded PTFE/Teflon rod1.Using:A. electrical insulation parts B. sealing parts C. automobile parts D. corrosive fluid conduitE. connector accessories2.Surface: A. flat and tidy B. no defects of crevices layersand separation3. Temperature range: -196oC to +260oC4. Best precision: 0.02mm5. Chemical...

UHMW-PE rod is an excellent low friction engineering Plastic that is outstading for ree running pulleys in many applications such as marinr and other associated industry Because UHMwpe rod is very abrasion resistant, it is suitable for the more aggressive environments such as grit and gravel....

There are two kinds of PTFE Rods to offer.,One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; Rods Over the diameter 50mm are manufactured by moulding