Manipulator

specification5×64×53×42×3rise and fall effective travel (mm)5000400030002000companding effective travel (mm)6000500040003000Suitable cylinder diameter (mm)1000-50001000-4000700-3000700-3000Stand rotary angle±180°±180°±180°manualLifting speed...

welding machineA, Using the international famous-brand inverter, It has high reliability and high precision of adjusting the electromotor rotate speed.B, The horizontal boom and vertical mast are made out of the box profiled iron: This structure is compact and rigidity is strong.C, The built-in...

Main parameters of 10TForging ManipulatorNo.ItemCZJ-10Unit1Nominal capacity10T2Max torque25T.m3Ingot size270-1000mm4Tong center distance900-2100mm5Tong forward distance2000mm6Clamp turning diameter1500mm7Clamp turning speed22rpm8Carriage speed25m/min9Front lifting speed5.5m/min10Rear lifting...

welding machineThere are a number of designs for the Manipulators, such as the stationary type, the stationary and turning type, and the all orientation type. The movement of the cross-beam is adopted with frequency conversion control, and you can select PLC programming controller. It is good in...

Column and beam adopt high quality steel structure with good rigidity. Both of column and beam are rectangle structure. The guide rail is manufactured by Q235/45 steel. During welding, the beam traveling is stable and there is no tremble that would influence the welding performance.The beam up...

Assist Manipulator,auto Manipulator,robotPneumatic Manipulator with articulated arms, equipped with special gripping tools, is suitable to handle manufactured products having an off-set centre of mass compared to the vertical axis of the Manipulator arm. Its modular structure has been designed to...

AUTO WM series,Heavy duty welding Manipulator (column and boom) has been widely used in the welding and assembling & welding of non-standard heavy duty vessel and pipes in petroleum, petrochemical, chemical, hydroelectric power, nuclear power industries, etc.Itconsists of column, boom, guide...

the technical spec of standard light duty welding Manipulator is as following list. ModelHC1212HC2020HC3030HC4040HC5050Effective extension stroke (mm)12002000300040005000Boom extension speed (mm/min)120-1200Effective vertical stroke (mm)12002000300040005000Boom elevation speed...

Manipulator:(1)Column and boom are used for the inside and outside circumferential and longitudinal welding.(2) It mainly consists of column, boom, pedestal,ladder,electrical equipmet and hand-control box. We also offer welding head and flux recovery system if customers require. (2)There are three...

Product DescriptionCZ Series Welding Manipulator consists of main framerotary device(manual or electrical)fastening device(aerodynamic or manual)trolley(electrical or manual) etc, and inner expansion available if customers need. The company is able to produce all kinds of Manipulators according to...

Auto-welding Manipulator,welding Manipulatorget CE certificationThere are a number of designs for the Manipulators, such as the stationary type, the stationary and turning type, and the all orientation type.The movement of the cross-beam is adopted with frequency conversion control, and you can...

All together seven functions can be applied, such as tongs clamping, peel rotating, peel parallel lifting, peel tilting, peel parallel side shifting, peel angular side shifting, Manipulator travelling etc.Technical Superiorities: Full-hydraulic driven, optimal design of hydraulic system. Reasonable...

The welding Manipulator could be divided into light medium,heavy,and super-heavy according to weight- bearing,effectively streching and up/down stroke.Structurestationary,stationary and revolve,moving and revolve.Cross-section of boom and colum is calculated scientifically.Drooping of boom along...

main specifications and parameters of Manipulatormain specification of ManipulatorManipulator holding workpiece diameter or weight range Φ 24-28mm or 1.5-6 KgManipulator travel range X 620mmY 1090mmZ 2180mm3. motor model and powerX GAS0703A01K19Y GAS0703A01K19Z GAS0703A01K194. rotary air...

Welding Manipulator is one kind of auxiliary devices for welding. In the front of the arm mounts one attachment. The attachment can move up and down, forward and backward with the arm. It can rotate within ±180°.The welding machine welds line on cylindersurface with WeldingManipulator...

According to the boom end weight loading, the welding Manipulator has many types: light duty type(LHQ),medium duty(LHZ),heavy duty(LHW),and super heavy duty(HCJ)Structure: stationary, stationary and revolve, moving and revolve.Cross-section of boom and column is calculated scientifically. Drooping...

The welding Manipulator could be divided into light,heavy,extra-heavy according to loading,effectively stretching and up/down stroke.welding Manipulator main technical ManipulatorModel

The Manipulator is the fixed and rotating type,This designe is simple for the customer.The Manipulator can be installed with the TIG ,MIG welding machine.With this welding,the space is smoothly. Zhonglian precision milled colum and booms are robustly con-structed to give adequate support and...

As an assisting welding machine,automatic welding Manipulator can be selected for mating welding system according to the art demands of customers.The stretching of cross arm adopts AC transduction stepless timing and runs with a steady speed.The head is equipped with electric cross find turning...