Iron Pipes

From this page, you can get the Impact Crusher,Jaw Crusher,Mobile Impact Crusher,Mobile Cone Crusher,Quarry Crusher,rotary kiln. if you are interested in our products,please contact us by E-mail(sales@jxjq.com) or telphone, thank you. The Mobile Crusher(plants) has the advantage of reasonable...

ductile Iron water pipe:Material: Ductile Iron(1) The standard:ISO2531-1998,EN545-2006/EN598,Class:K8,K9(2) Effective length:6Mfor bulk shippment, 5.7M for 20' or 40' container shippment(3) Inner surface cement linningaccording to ISO4179 and outer surface zinc+bitumen coating according to...

ductile Iron Pipespecifications :The stardard of pipe:ISO2531-1998,EN 545-2002 ,K9Effective length :6M when using bulk shipment way,or about 5.5m or 5.7m when in 20' container shipment wayHigh strength ,lighter than gray Iron,good corrosion resistance ,no furring small flow resistance,easy...

Centrifugal ductile Iron Pipes are produced by centrifugal casting process of a pipe made of ductile Iron. It is widely used in metallurgy, mining, water, oil, and municipal public building in a variety of pipeline project could carry water, gas and other fluid media. It has the nature of Iron,...

We manufacture and supply Iron castings such as engineering castings, cast Iron drainage and architectural Iron castings for a range of customers spanning different industries. We employ our knowledge and expertise to produce quality Iron castings, deliver them on time and keep our prices...

SSAW 219-2000mm

Ductile Iron PipeProduct Introduction:Annually produce 200 thousand tons of DN80mm-DN1800mm ductile Iron Pipes with the length of six meters. Because of the excellent performance and quality, the product upgrades the reliability of the pipe network .Specification:1. Standard: ISO2531 / EN545 /...

Size: DN80~DN1600Material: Ductile IronStandard : ISO2531 & BS EN545Type of connectionPush-on Joint & Flange JointCoatingInternal lining: Cement mortar according to ISO 4179 as specified.External Coating: Zinc coating plus bitumen painting according to ISO 8179 as specified.

Ductile Iron Pipes/ ductile cast Iron Pipes/ ductile Pipes/ductile Iron spun Pipes:Standard:ISO2531:1998/BSEN545/BS4772/DINSocket and spigot ends with flexible push on joints, Class K9Internal lining of cement mortar in accordance with ISO 4179:1985,and external coating of zinc in accordance with...

1. Material: Ductile Iron2. Standard: ISO 2531:1998 or BS EN 545:2002, K8, K9, K103. Effective length: 6m/pc by bulk vessel or 5.6m/pc for 20' or 40' container4. Internal cement linningaccording toISO 4179:1985 and External bitumen coatingaccording to ISO 8179:19955. Zinc casting: at least...

Ductile Iron Pipes class K9, according to ISO2531 or EN545.push-in type joint, class K9.Outside zinc coating and then bitumen painting according to ISO8179, inside cement mortar lining according to ISO4179, 100% rubber gasket according to ISO4633.

K9 EN545 LSO2531 ductile Iron pipenameductile Iron pipePlace of originHeBei ChinaSpecificationDN80--DN1000forms of interfaceT / K / SLenth6mUsageurban water supplyStandardEN545Quantity per day200 ton per daySection formroundpaymentL/C T/TDelivery10--20 daysTechniquecastcorrosion...

Grooved pipeline system is connected by pipeline internal pressure on the sealing ring, the clamp withhold two ends with sealing ring inside. Before connecting pipe, we will use slot machine or roller-car handles pressure circling the pipe ends to form standard depth of groove, galvanized steel...

1. Technical specification and accessories:The Pipes standard in accordance with EN598 for class K9,L=5750±30mm;Internal High aluminium cement lining according to EN598;External zinc(130g/m2) + red bitumen (minimum 70 micros) painting acc. to EN598;The Pipes matched 100% NBR rubber gasket...

EN545 EN598 ISO2531 DOUBLE FLANGED PIPECLASS K12 K9, EPOXY COATING OR ZINC + BITUMEN COATINGLENGTH:80-5500MMDN80-DN1000MMFIXED FLANGE PIPE WITH OR WITHOUT PUDDLE FLANGE

Pipe fitting/pipe elbow/wear reistant pipe/Centrifugal ductile Iron Pipes are produced by centrifugal casting process of a pipe made of ductile Iron. It is widely used in metallurgy, mining, water, oil, and municipal public building in a variety of pipeline project could carry water, gas and other...

Hot Dip GalvanizedPipeIt used for water treatment pipe. We had been successfully in many cases, such as Surabaya, Indonesia, government water treatment. Most of it we delivered to Middle East, and South East Asia.Standard: GB 6728, ASTM A-53, GB/T 3091, BS 1387, JIS G 3454, GB/T 3091.Grade: SS 400...

General informationApplied standardsGB13295，ISO2531，BSEN545/598Joint TypeT-tpye，K-type，Flanged-type jointother joint type based on mutual agreed designingDiameter rangeDN80-2000mmWorkmanshipBy Lost-Foam (EPC）workmanshipWall thicknessClass K12, K14Coating and...

Galvanized steel tubeOut diameter: 48.6mmThickness: 2.2mm-2.4mmLength: as per your requirementStandard: Q235, Q345, STK500, S235JR, S275JR, EN10025, EN10219, BS1139Delivery time: within 7 daysPayment: by 30% deposit first then pay the balance after received the copy of B/L or L/C at sight

Ductile cast Iron pipe not only retains all of cast Iron Pipes attractive qualities, such as machinability and corrosion resistance, but also provides additional strength, toughness, and ductility. It is lighter, stronger, more durable and more cost effective than cast Iron Pipes. It is reliable...