Geomembranes

HDPE GEOMEMBRANE IS MADE OF HDPE GRANULE.ITS FEATURES: HIGH TENSILE STRENGTH; AGING-RESISTANCE; WELDING WELL; INSTALLATION CONVINIENCE.IT IS APPLICABLE FOR RIVER CHANNEL, RESERVOIR, DYKE, DAM, UNDERGROUND AND REFUSE DUMP.THICKNESS: 0.2-2.0MM.WIDTH: 4-6M..

HUALONG Geocomposite membrane, available in varied width reaching 6.0m,is made of high quality PE geomembrane with one or two surfaces of non-woven geotextiles.Offering outstanding properties including great puncture resistance,high friction coefficient, long-term durability and good drainage...

HDPE GeomembraneThey are used in landfill caps and base liner applications under roads, railways, secondary containment for ground tank farms, as well as within various containment structures such as dams, canals, ponds, rivers and lakes. They are also used for waterproofing of buildings and...

Material: HDPE, LDPE, Thickness: 0.18mm-2.5mm Width:2.0m-6.0m Quality Inspection Standard: GB/T17643-1998, GB2 and GM13Quality Control Measure: strictly comply with ISO9001:2000 Features: 1) Can bear chemical erosion. 2) A wider using temperature range and a longer using life. Application: It can...

Composite GeomembraneComposite geomembrane is a kind of impervious material compounded of geotextile and geomembrane. It has many types: one textile one membrane, two textiles one membrane, many textiles many membranes and so on. The width general is 4-6m. Composite geomembrane is mainly used for...

GB/T17643ItemsIndexGLGHGL-1GL-2GH-1GH-2Tensile strength MPa≥14≥17≥25Elongation at break%≥400≥450≥550Right angle tearing strengthN/mm≥50≥80≥110Carbon soot quantity %≥2Environmental stress resistant cracking performance--≥1500Oxidation induction time at...

It is applied in landfill waste site sewage and silth treatmentsite.tailing depot and underground construction project.

geomembrane MQ209 is made by Linear low density polyethylene resin as the main material, at the same time on both sides covered with a polypropylene non-woven filament for the enhanced layer,usingdirect pressure hot-melt process for forming a polypropylene polyethylene waterproofing membrane...

Smooth HDPE GeomembraneGM SH series of geomembrane is manufactured from High Density Polyethylene resins. The surfaces of both sides are smooth. The products are manufactured by the technology of coextrusion-blown triple layer. It provices Geomembranes with specific properties on each layer, e.g....

HPDE geomembrane is a kind of impermeable membrane, the base material is terylene no woven textile, adopt single or multilayer different plastic membrane, shaped after multiplex heat treatment or laminating course.Item400 500600700 8009001000remark0.250.350.30.35Breaking strength KN/M5 7.510.012.0...

Geosynthetic clay liners (GCLs) with HDPE Geomembraneare an established sealing product in the geoenvironmental industry. They are used in landfill caps and base liner applications under roads, railways, secondary containment for above ground tank farms, as well as within various other containment...

GeomembraneHDPE Geo-membrane is produced by a method of three layer co-extrusion model. The raw material is processed at 200°C by fusing and co extrusion, whose basic properties are kept during the producing process.SpecificationThickness: 0.2mm - 2.5 mmWidth: Within 8 MQuality Inspection...

Function:1.Environmental protection, sanitation (such as landfill, waste water treatment, toxic and harmful chemicals disposal sites, storage of dangerous goods, industrial waste, construction and demolition waste, etc.)2. Water (such as impervious, stop water loss, and reinforcing of lakes, and...

HDPE Geomembranes are the preferred products for lining projects requiring low permeability, exceptional chemical and ultraviolet resistance properties, which makes them an extremely cost-effective product for many applications.We also apply LDPE geomembrane,EVA geomembrane,and...

Features Specifications: HDPE GeomembraneHighDensityPolyethylene(HDPE)GeomembranesmoothPropertiesT estmethodTestValue(ave.)0.50mm0.75 mm1.00mm1.25mm1.50mm2.00mm2.50mmWidth(mm)______7000700070007000700070007000Thickness-mm(min.ave.)L...

1.roofing material2. pvc membrane with reinforced polyester inside3. Thickness:1.20mm, 1.50mm, and 2.0mm4..Watrproof, aging resistance,uv and flame resistance, enviromental-friendly during construction.5. Applied in various fields, such as roof construction,subway, bridges, channel tunnel, planted...

material: LDPE, LLDPE, HDPE, PVCPVC waterproofing geomembrane characteristics: 1.1 PVC waterproof effect is good: PVC waterproofing membrane is a polymer material with a good impermeability, high strength and tear resistance characteristics, is a high-quality waterproof materials. 1.2 long life,...

HDPE Geomembrane with textured surfaceMaterial:HDPE, ( no odor)Color: black or whiteThickness: from 1.0 mm to 2.0mmWidth: from 4.0m to 8.0mRoll Length: 50M (or at client’s request).Product description:HDPE geomembrane is a new type of rough surface impervious material, a single rough surface,...

1)geomembrane2)thickness:0.3mm~2.5mm3)width:2m~8mGeomembrane is a kind of waterproof material with basic raw material of high molecular polymer. It is mainly divided into LDPE geomembrane, , HDPE geomembrane, and all kinds of composite geomembrane.Complete variety of specifications of width and...

geosynthetic compositegeomembraneOne PET nonwoven and one geomembrane: area weight: 300-600gsmgeomembrane thickness: 0.2-0.4 mmWidth: 4-6mTwo PET nonwoven and one geomebrane: Area weight: 400-1650gsmGeomembrane thickness: 0.2-0.8mmWidth: 4-6m