Browse DIP Switches by Category:

DIP Switches

Total 30 products in category of DIP Switches

ONPOW (DIP switch) DPR series

DIP switch, for ONPOWSwitching capacity 25mA at 24VDCInsulation resistance 100MΩ at 250VDCContact resistance 50mΩ maxDielectric strength 500VAC /1minOperating force 400gf maxElectrical life 3000 timeAmbient temperature -20 to 70(no icing)

float switch

Float SwitchSimple construction,reliable performance: The product can output stable and reliable switch control signal of"making","breaking" without any fault action, so its reliability is very high and antiinterference is strong.Sturdy and durable,need not maitain: The product...

TIME SWITCH

Time Switch// Wall SwitchFeatures:Material: Crystal Glass Panel and ABS plastic.Glows in dark with LED indication.E-start, no sparking contacts.Many fancy designs to choose from.Auto-identify function, keeping off after a power cut.Easy to install, replacing original wall switch directly.Life...

DIP Switch

ELECTRICALElectrical life: 2000 operation cycles per switch 24VDC, 25mA. Non-Switching Rating: 100mA, 50 VDCSwitching Rating: 25mA, 24VCD. Contact resistance: (a) 50m max. At initial( b) 100m max. After life test. Insulation resistance: 100M min. (at 500VDC) Dielectric Strength: 500VAC / 1...

rocker switch KCD1-101 black 2P

rocker switch KCD1-101 black1> Rating: 6A 250VAC, 10A 125VAC2> Dielectric Intensity: >1500VAC/1min3> Life: >10000 Cycles4> Enviromental Temperature: -25+855> Contact Resistance: <50mΩ6> Insulation Resistance: >100mΩ7> Mounting size is 19.2mm X13mm

Indoor HV Load Switch

N3-12, FN3-12R, FN3-12R / S load switch between indoor high-voltage electrical installations. 50Hz6kV12kV,,,. Applicable to the exchange of 50Hz, 6kV or 12kV network, as the open-and closed-off load and over load current use, can also be used for open-and closed-off long-term no-load, no-load...

piano type DIP switch

Electrical and mechanical characteristics: Switching function: 2 to 12 positions are available Contact rating: 100mA 50V DC at steady situation 25mA 24V DC at make-and-break Contact resistance: 50m ohms maximum at initial Insulation resistance: 100M ohms minimum at 500V DC Operation life:...

DIP switch/Switch/slide switch

DIP switch/Switch/slide switch1.Contact resistance 50m max2.Operating travel:2.0mm3.Operating force:1000gf max4.Operating temp:20C to70C

Switch-Disconnecter

DNGL series Switch-disconnecter is applicable for AC 50Hz, rated voltage AC 660V and below, DC440v and below, and rated current 3150A.It can be applied for manually infrequent making & breaking and disconnecting of the circuit. It only can be used for disconnecting power supply, and can't break...

DIP Switch

PianoType DIP SWITCHBDS-DPL-01-C-V .Positions:01 Pos.Mechanical Life:2,000 operations.Electrical Life:2,000 operations.Operation Force:400gf Max.Operation Temperature:-20oC to +70oCStorage Temperature:-40oC to +85oCRohs and Lead Free Solderable.Desing in Taiwan.(Appropriation product)

6*6mm pin tact switch

6mm pin tact switchTechnological Parameter:contact Resistance:≤0.03ΩInsulation Resistance:≥100MΩwithstand voltage:250V,AV/minTemperatture:-25-70oCRated Load:DC12V 0.2AOperation Force:can be adjsted as customer requestelife:100000time

Code Switch----DIP-6P

code switch--DIP-6PSwitches----Tact SwitchesMicro SwitchesUni-directional push-button SwitchesSlide dnob SwitchesToggle /Toggle slide SwitchesCode SwitchesButton SwitchesRocker/CS type 21(42) sockets series6 pins switchRated load: 50V DC/1AContact resistance: ≤0.03ΩInsulation resistance:...

TACT SWITCH SOT-152HST MITSUMI SMD

KWL Electronics International Trade Co.,Ltd,which has obtained several IC Industry certificatesis famous for its IC ELECTRONICS COMPONENTSTACT SWITCHSOT-152HSTMITSUMISMDPictureSpecificationsFeatures1. Micro Tactile Switch in the 4.5mm square sizewith 0.55 thickness.2. It corresponds to SMT, the...

2.0 pitch box header

The box Header,used with IDC series,include 1.27mm pitch,2.0mm pitch,2.54mm pitch,each series include straight,right,SMT type.

02-12 positions SMT Type DIP Switch

MECHANICAL1.operation force :800g max2.stroke : 0.90 mm3.operation temp : -20 °C~ 70 °C4.storage temp : -40 °C to 85 °CELECTRICAL1.electrical life :2000 operations cycles per switch2.non-switching rating :100mA , 50VDC3.switching rating :25mA , 24VDC4.contact resistance :50mΩ...

DIP Switch KF1001

DIP Switch KF1001MATERIALSBASE: UL94V-0 PBT Thermoplastic, Color: BlackCOVER: UL94V-0 PBT Thermoplastic, Color: BlackACTUATORS: UL94V-0 PBT Thermoplastic, Color: BlackTERMINAL: Copper Alloy wich gold platingMECHANICALOperation Force: 0.2kgf max.Stroke: 2.0mmOperation Temp: -20ºC to...

DIP Switch DPL Series

DIP SWITCH/PIANO TYPE DIP SWITCH/DIGITAL SWITCHRating: 25 mA 24 V DCNon-switch: 100 mA 50 V DCPiano Type , Red Color , Long KeyPin Length 7.62mmPin Pitch 2.54mm2~10,12 PositionsContact resistance: 50 mΩ (Max.)Dielectric strength: AC 500 V 1 minuteMechanical life: 2,000 cycles (Min.)Operating...

5 position DIP switch

1.MaterialTerminal:Copper Alloy wich gold platingHousing:PPS,UL94V-02.ElectricalRated Voltage:50VRated Current:100AContact Resistance:50mΩInsulation Resistance:1000mΩ/DC500VWithstand Voltage:1500V/1Min3.Mechanlecal:Temp.Range:-55~+85oCDurability:3000Operations min.

7x7 press switch

tact switch , touch switch, tactile switch We supply all kinds of touch Switches/Tactile switch/pressure switch/toggle switchFeatures:1) Switch for door or safety purpose2) Applied to home appliances and electrical products, such as refrigerator, cupboard and TV switch 3) Circuit: ON - OFF(ON) -...

Auto Part

Auto Part1:material: Copper, Brass, Bronze, CuSn, CuNi, Ni, CuNiZn, Monel, rivet material: solid silver alloy contacts and bimetal contacts, welding material: Ag, AgNi, AgCuNi, AgSnO22: OEM/ODM parts of Pressing Parts: Yes, Auto parts, engine parts, computer electronics.3: Process: punching,...